Course Content
Transition Gate Installation (9.0)
Installation Testing (11.0)
Installation Competency Test
Ceiling Track Installation Training
About Lesson

The turntable is suitable for concrete and timber ceiling fixings. The turntable must be fitted to the ceiling with a minimum of four fixings. These fixings must be directly opposing each other as shown in the image.

When mounting a turntable, it is preferable to fix the fixings directly to the base plate, this can be seen in the top left fixing of the image below. However, this is not always possible, depending on the amount and layout of the track take off positions. As the image shows, the remaining three fixings are passing through a track bracket.

It is always recommended that a turntable is the first system to be installed during a ceiling track installation, followed by the straight track/track bends.