7.4 – LEG

In this section it will explain the correct procedure on removing and reinstalling the Legs for servicing procedures or replacement. The below instructions are relevant to both of the Gantry Legs.

Removal

Step 1 – Remove the Track from the Gantry. (Refer to section 7.2 for guidance)

Step 2 – Unthread the large star handle from the leg which secures the leg and foot together.

Step 3 – Raise the Leg from its fixing within the foot.

Step 4 – Repeat steps 2 and 3 to remove the other leg from the gantry.

Refitting / Replacement

Step 5 – Refitting is a reversal of the removal process noting the following points:

1. Ensure that the bolt is fully secured once tightened.
2. Ensure that the two legs are in the same orientation when refitting.