Course Content
TX600 – Training Manual
TX600 – Commissioning Manual
TX600 – Spare Parts Manual
The TX600 spare parts manual is a comprehensive guide that provides detailed information about the spare parts used in the TX600 machinery. It includes a parts list, descriptions, illustrations. It is a valuable resource for technicians and maintenance personnel to effectively repair and maintain the TX600 equipment.
Test Topic
TX600 (Fixed Motor)
About Lesson

9.3    Batteries

This section will instruct the correct procedure on how to remove and replace the Batteries.



Step 1 – Remove external covers of the Hoist. (refer to section 9.1)

Step 2 – Disconnect the power lead from PCB. (See section 9.2 PCB for reference)

Step 3 – Release the Velcro straps (arrowed) to give access to the Batteries.

Step 4 – Detach the power cables from the battery terminal. (Arrowed)


Refitting / Replacement

Step 6 – Refitting is a reversal of the removal process noting the following points:

1. Make sure the battery terminal are on the outer edge and the terminals are pointing inwards.

2. Ensure the positive lead (Red) goes to the correct side of the Hoist (Circled) and the negative lead (Black) goes to the correct side of the Hoist (Circled).

3. Ensure Velcro is installed in the below fashion.