Course Content
TX600 – Training Manual
TX600 – Commissioning Manual
TX600 – Spare Parts Manual
The TX600 spare parts manual is a comprehensive guide that provides detailed information about the spare parts used in the TX600 machinery. It includes a parts list, descriptions, illustrations. It is a valuable resource for technicians and maintenance personnel to effectively repair and maintain the TX600 equipment.
Test Topic
TX600 (Fixed Motor)
About Lesson

9.6 QRS Hook

This section will instruct the correct procedure on how to remove and replace the QRS Hook.



Step 1 – Using a 2mm Allen key unscrew the grub screw (arrow) until it releases its hold on the Pin.

Step 2 – Slide the pin out of the hook to release the lift tape.


Refitting / Replacement

Step 3 – Refitting is a reversal of the removal process noting the following point:

1. Make sure the hole in the QRS pin lines up with the grub screw

2. Ensure the hook is attached to the lift tape in the below orientation.