3.3 Lift Tape Condition
In this section the images below will show two types of lift tape condition, one in which the wear is minimal and therefore in an acceptable condition, whereas the other Lift Tape has a level of wear which is unacceptable and requires a change during the current service.
|
Acceptable Condition |
Unacceptable Condition |
|
It can be seen there is a very small amount of wear to the tape but nothing substantial that requires an immediate Lift Tape replacement. It is advised the Service Engineer informs the Customer of the dangers of Lift Tape fraying and that they keep an eye on the tapes condition.
|
In the first image you can see a clear increase in wear with additional fraying. This is the start of the Lift Tape starting the fraying process which will only increase each lift. If the Lift Tape is discovered in this condition or worse, at any point along the tape, the Lift Tape should be replaced immediately. The second image is an example of extreme wear which is a condition the Lift Tape should never be allowed to reach. This condition is endangering the safety of the patient.
|
