Course Content
TX600 – Training Manual
TX600 – Commissioning Manual
TX600 – Spare Parts Manual
The TX600 spare parts manual is a comprehensive guide that provides detailed information about the spare parts used in the TX600 machinery. It includes a parts list, descriptions, illustrations. It is a valuable resource for technicians and maintenance personnel to effectively repair and maintain the TX600 equipment.
Test Topic
TX600 (Fixed Motor)
About Lesson

9.4    Traverse Motor – Powered Traverse Hoist Only

In this section it will explain the correct procedure on removing and reinstalling the Traverse Motor for servicing procedures or replacement.



Step 1 – Remove external covers of the Hoist (refer to section 9.1)

Step 2 – Remove the PCB from the hoist (refer to section 9.2)

Step 3 – Using a 5mm Allen key remove the two M6 x 40 bolts. (arrowed)

Step 4 – Slide the motor off the traverse shaft by pulling the Motor away from the Chassis


Refitting / Replacement

Step 5 – Refitting is a reversal of the removal process noting the following point:

  1. Ensure the Traverse Motor is attached in the correct orientation, allowing the motor to align with the motor mounts.