Course Content
TX600 – Training Manual
TX600 – Commissioning Manual
TX600 – Spare Parts Manual
The TX600 spare parts manual is a comprehensive guide that provides detailed information about the spare parts used in the TX600 machinery. It includes a parts list, descriptions, illustrations. It is a valuable resource for technicians and maintenance personnel to effectively repair and maintain the TX600 equipment.
Test Topic
TX600 (Fixed Motor)
About Lesson

9.7    Bottom Cover

This section will instruct the correct procedure on how to remove and replace the Bottom Cover.



Step 1 – Remove external covers of the Hoist. (refer to section 9.1)

Step 2 – Remove QRS Hook. (refer to section 9.6)

Step 3 – Disconnect the power cable from the PCB.

Step 4 – Disconnect the display and LED able from the PCB. (Arrowed)

Step 5 – Gently pull the bottom cover away from the chassis and feed the Lift Tape through to detach it from the unit.


Refitting / Replacement

Step 6 – Refitting is a reversal of the removal process noting the following point:

1. Make sure the lift tape is fed through the slot in the correct direction

2. Ensure the E-lower cord is pulled through its designated slot.

3. Ensure the air grommet lines up with the hole.