Course Content
TX600 – Training Manual
TX600 – Commissioning Manual
TX600 – Spare Parts Manual
The TX600 spare parts manual is a comprehensive guide that provides detailed information about the spare parts used in the TX600 machinery. It includes a parts list, descriptions, illustrations. It is a valuable resource for technicians and maintenance personnel to effectively repair and maintain the TX600 equipment.
Test Topic
TX600 (Fixed Motor)
About Lesson

9.11.1  Wheels Standard

Within this section it will explain the correct procedure on removing and reinstalling all wheel variants of the Hoist (excluding the QRT System Hoist), this section will include Track Type 1, 2,3,4,5. See Section 1 for guidance on the track type profiles.

The images below refer to the Standard Wheel (Track Type 1), but the same procedure will apply to all the Wheel variants.



Step 1 – Using circlip pliers, remove the circlips from both wheels. (arrowed)

Step 2 – Remove the two Wheels from the Hoist as shown – Ensure the Spacers are situated within the Wheels.

Step 3 – From the front face of the Hoist, remove the Axel along with the other Wheels as shown.


Refitting / Replacement

Step 4 – Refitting is a reversal of the removal process noting the following points:

1. If replacing with brand new wheels, the below image is an exploded diagram of how the Wheels are fitted together along the axel. The Grey line indicates the Chassis Wall.